RHP Triple Seal Short Base Pillow Unit, 25mm Bore

Stock Code: TSNP25DEC
4 In Stock
Want more than what's in Stock? Please call us on 01482 329553 or email us on sales@georgelodge.co.uk
£52.38 (inc VAT) per EACH
£43.65 (exc VAT)
Quantity: - +

RHP SNP Self-Lube Short Base 2 Bolt Pillow Block Casting. (Metric Thread M10 X 1,5) The casting will be marked SNP3, the bearing is a T1025-25G. A triple lip seal for applications with a high degree of contamination. It consists of a one-piece moulded nitrile seal with three sealing lips, bonded to a protective steel outer pressing which is strongly secured in the outer ring making a highly efficient sealing arrangement. It is not recommended for high speeds.

The shaft locking arrangement is a eccentric collar lock. This type of lock consists of an eccentric diameter formed on the extended inner ring of the bearings which engages a similarly formed eccentric diameter in the bore of a separate collar. Locking is achieved by turning the collar in the direction of shaft rotation until the eccentric diameters of both collar and inner ring are fully engaged.

Lubrication - Self-lube bearings are factory charged with the correct amount of grease and do not require a further grease charge when fitted. Re-lubrication is not normally necessary except when operating at extremes of temperature, speed, loading, extended running or where excessive wet or diry conditions exist. The housings are provided with a tapped hole to facilitate relubrication and supplied with a grease nipple. All units are tapped 1/4" UNF. Note; a grease adapter (ref 1003G) which are available on our website to fit the 1/4" UNF tapped hole to give 1/8" BSP female fitting.

Please see download below to open up the RHP catalogue for further dimensions. 

Click on any of the following links to download the file.